
| Membrane de filtre | PVDF |
|---|---|
| Soutien/Drainage | Pp |
| Cage/bouchon d'extrémité | Pp |
| Noyau | PP / 316L acier inoxydable |
| Adaptateur | PP / PP + acier inoxydable |
| O-Anneaux | S / E / N / F |
| Formulaire d'étanchéité | Scellé par soudure de chaud-fonte, aucun adhésif |
| Diamètre extérieur | 69mm |
| Diamètre intérieur | 33mm |
| Longueur | 5-40 pouces |
| Zone de filtration | ≥ 0,32 m2 (5 pouces) ≥ 0,65 m2 /10 pouces |
| Pression différentielle maximale (en avant) | 5, 2 bar@ 25°C, 1, 9 bar@82°C |
| Pression différentielle maximale (marche arrière) | 2.1 bar@25°C |
| Endotoxines | < 0,25 UE/mL |
| Extractibles | < 40 mg / 10 pouces |
| Vapeur en place | 121 °C 30 min Pression différentielle < 0,5 bar |
| Autoclave | 121 °C 30 min |

| Matériel | Taille des pores | Longueur | Connexion | Matériau du joint | Tige centrale |
|---|---|---|---|---|---|
| PVDF | 010 = 0,10 μm 025 = 0,25 μm 045 = 0,45 μm 065 = 0,65 μm 100 = 1,0 μm |
05 = 5" 10 = 10" 20 = 20" 30 = 30" 40 = 40" |
0 = DOE 1 = 222/Plat avec insert SS 316L 2 = 222/plat 3 = 222 / Fin 4 = 222/Ailette avec insert 316L SS 5 = 226 / Fin avec insert SS 316L 6 = 226 / Fin 7 = 226/plat 8 = 226/Plat avec insert SS 316L |
S = Caoutchouc silicone E = Caoutchouc monomère éthylène propylène diène (EPDM) N = caoutchouc nitrile F = caoutchouc fluoro |
Blanc = Polypropylène R = polypropylène renforcé S = acier inoxydable 316L |

